S-502 Crosby® closed swage socket

$0.00
  • Forged from special bar quality carbon steel, suitable for cold forming.

  • Swage socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.

  • Hardness controlled by spheroidize annealing.

  • Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User’s Manual).

  • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper 'after swage' dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.

  • S-502 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.

  • In accordance with ASME B30.9, all slings terminated with swage sockets shall be proof loaded.

Add To Cart
  • Forged from special bar quality carbon steel, suitable for cold forming.

  • Swage socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.

  • Hardness controlled by spheroidize annealing.

  • Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User’s Manual).

  • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper 'after swage' dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.

  • S-502 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.

  • In accordance with ASME B30.9, all slings terminated with swage sockets shall be proof loaded.

  • Forged from special bar quality carbon steel, suitable for cold forming.

  • Swage socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.

  • Hardness controlled by spheroidize annealing.

  • Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User’s Manual).

  • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper 'after swage' dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.

  • S-502 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.

  • In accordance with ASME B30.9, all slings terminated with swage sockets shall be proof loaded.